The LC T01 X1 leather case is suitable for the Tab-Ex 01/02 DZ1.

The CC S01 car charger is suitable for Smart-Ex 01, Ex-Handy 09 and Tab-Ex 01.

The LH-Ex S02 leather holster with belt loop is suitable for the Smart-Ex 02 series.

The wired remote speaker microphone is specially designed for PTT applications. With its robust but lightweight housing and secure ISM interface, this device is an ideal complement to our IS330.1 and IS530.1 mobile devices. The dynamic loudspeaker is specially designed for noisy environments.

ATEX II 2G Ex ib IIC T4 Gb

The Bluetooth hand-held scanner is a high-performance SE4750-HP scanner: It
can capture 1D/2D barcodes, post codes and OCR.
The hand-held scanner is characterized by the following features:
- Bluetooth: Class 1 - Version 4.0
- Radio range: up to 100 m
- Data rate: 3 Mbit/s (2.1 Mbit/s)
- Utilities: 123Scan² and Scanner Management Service (SMS).

The scope of delivery includes:
BCS 3678ex NI hand-held scanner, lithium-ion battery 3.6 V/2800 mAh (10.08 Wh), special tool for safety lock, quick start guide (DE + EN).

A base station or battery charging station is not included in the scope of delivery and must be purchased separately.

The high-end model from the UK 4AA model series with explosion-proof LED technology.
The lamp is equipped with special eLEDs and the revolutionary CPO (Compound Path Optics) and TRS (Thermal Recovery System) technology. An electronic system keeps the light output at a constantly high level (130 lumens) over the entire burn time and extends the burn time by up to 10 % with one battery charge.
This lamp also has excellent gas and dust explosion protection.

Features:
- Service life of the eLED approx. 10,000 hrs.
- Rubberized switch ″on/off″, easy to operate even when wearing gloves
- 100 % waterproof and dustproof
- Robust ABS housing, electrically conductive, corrosion-resistant
- Pressure equalization valve
- Simplified battery change thanks to special rocker

Scope of delivery:
1 UK 4AA CPO TS or ES
4 AA batteries

The 3-part plastic holder is suitable for almost all helmets and can be adjusted in many ways.

The high-end model from the UK 4AA model series with explosion-proof LED technology. The lamp is equipped with special eLEDs and the revolutionary CPO (Compound Path Optics) and TRS (Thermal Recovery System) technology. An electronic system keeps the light output at a constantly high level (130 lumens) over the entire burn time and extends the burn time by up to 10 % with one battery charge. This lamp also has excellent gas and dust explosion protection.

Features:
- Service life of the eLED approx. 10,000 hrs.
- Rubberized switch ″on/off″, easy to operate even when wearing gloves
- 100 % waterproof and dustproof
- Robust ABS housing, electrically conductive, corrosion-resistant
- Pressure equalization valve
- Simplified battery change thanks to special rocker

Scope of delivery:
1 UK 4AA CPO TS or ES
4 AA batteries

The sturdy nylon belt pouch is suitable for all UK 3AA/4AA/Mini Q40 types. With large flap on the back, also suitable for FW safety belts.

Dimensions L x W x H: 180 x 75 x 20 mm

The service life of the eLED lamp is approx. 10,000 hours.
The “HI/LOW/OFF” switch is also easy to operate with gloves.
The lamp is 100% waterproof and dustproof and offers simplified battery replacement thanks to a special rocker.
3 AA batteries are included in the scope of delivery.

Dimension L x W x H:
135 x 40 x 34 mm

The small and handy pen-shaped flashlight is ideal for maintenance and inspection work wherever reliability and explosion protection are required.
The small and lightweight torch can be carried in your pocket like a ballpoint pen thanks to the clip molded onto the housing and is therefore always ready to hand.

The LED version impresses with its very long light duration on a single battery charge. The practical rear switch ensures that the lamp can be easily operated with just one hand.

Features:
extremely bright LED in pre-focused quality reflector
Practical rear switch
100 % waterproof and dustproof
robust ABS housing
complies with CENELEC (CE) requirements

Scope of delivery:
1 UK 2AAA Penlight eLED
2 AAA batteries

The docking station is suitable for Agile, Agile X and Agile X IS.

Technical data
- Input voltage: DC 19 V
- Charging with battery inserted
- Interfaces:
4 x USB 2.0
1 x RS232
1 x Ethernet 10/100 Mbit/s
1 x HDMI
1 x charging port

Included in the scope of delivery:
- Docking station
- Mounting bracket
- Screws for mounting bracket (6 pieces)
- Fixing elements (2 pieces)
- Inserts for Agile X (2 pieces)
- Screws for insert (2 pieces)
- Rubber feet (4 pieces)
- Power supply unit
- Power cable (EU + US)
- Quick guide (DE + EN)

The country-specific AC power cable in the EU version.