Skip to Content
Stylus for SP9EX1 and SC9EX1
The passive stylus with spiral cable can be ordered individually or in a pack of 3.
It is important that the stylus may only be changed outside of potentially explosive atmospheres.
19.00 €
Hand strap for Pixavi Phone/Cam/SP9EX1 and SC9EX1
The wrist strap with quick-release clip is suitable for the Pixavi Phone, the Pixavi Cam, the BARTEC SP9EX1 smartphone and the BARTEC SC9EX1 smart scanner.
It protects the device from falling.
39.00 €
Neck strap for SP9EX1 and SC9EX1
The neck strap with quick-release clip is suitable for the Pixavi Phone, the Pixavi Cam, the BARTEC SP9EX1 smartphone and the BARTEC SC9EX1 smart scanner.
The neck strap protects the device from falling.
49.00 €
Battery tool for Pixavi Phone/Cam/SP9EX1 and SC9EX1
The battery tool is suitable for the Pixavi Phone, the Pixavi Cam, the BARTEC SP9EX1 smartphone and the BARTEC SC9EX1 smart scanner.
It is important that the tool is only used outside of
areas where there is a risk of explosion.
9.00 €
Plug-in power supply for SP9EX1 and SC9EX1
The plug-in power supply (EU) is suitable for the BARTEC SP9EX1 smartphone and the BARTEC SC9EX1 smart scanner.
It is important that the plug-in power supply is only used outside of
hazardous areas.

The USB-C cable (type G7-S0Z0-0010) is not included in the scope of delivery and can be purchased separately if required.
32.00 €
4-way charging station for SP9EX1 and SC9EX1
The 4-way charging station is suitable for the BARTEC SP9EX1 smartphone and the BARTEC SC9EX1 smart scanner.
The charging station allows you to charge up to four smartphones or smart scanners and batteries at the same time.
The charging station may only be used outside potentially explosive atmospheres.

Included in the scope of delivery:
- 4-way charging station
- Power supply unit for 4-fold charging station

Also required (not included in the scope of delivery):
Country-specific AC power cable
(with IEC-60320-C13 plug)
e.g. AC power cable type G7-S0Z0-0020/0021/0022/0023
519.00 €
Power supply unit for single charging station for SP9EX1 and SC9EX1
The power supply unit for the single charging station is suitable for the BARTEC SP9EX1 smartphone and the BARTEC SC9EX1 smart scanner.
The power supply unit is only intended for use outside of
outside potentially explosive atmospheres.
73.00 €
Power supply unit for 4-way charging station for SP9EX1 and SC9EX1
The power supply unit for the 4-fold charging station is suitable for the BARTEC SP9EX1 smartphone and the BARTEC SC9EX1 smart scanner.
The power supply unit may only be used outside potentially explosive atmospheres.
80.00 €
ATEX pneumatic reciprocating saw
The ATEX pneumatic reciprocating saw is a lightweight saw for universal use, even in explosion-protected areas.
With a stroke length of 28 mm and a weight of 4.0 kg, the reciprocating saw is very handy and well suited for everyday use.
The saw is supplied with a carrying case.

ATEX: II2GExhIIBT5Gb
1,267.00 €
ATEX pneumatic hammer drill
The ATEX pneumatic hammer drill enables drilling up to a diameter of 50 mm in concrete. The percussion mechanism can be switched on and off.
The hammer drill can also be used under water without any problems.

The saw is supplied with a transport case and a depth stop.

ATEX: II2GExhIIBT6Gb
3,511.00 €
ATEX-Bohrhammer SDS-plus
The SDS-plus rotary hammer with impact is used for drilling in concrete, stone and masonry.
The SDS-plus hammer drill without impact is suitable for drilling in wood, plastic, non-ferrous metals, cast iron, steel and stainless steel.

The hammer drill is ideal for use in the construction industry (new builds, conversions and renovations), workshops, the chemical industry / refineries and the nuclear industry.

Included in the scope of delivery:
Pneumatic rotary hammer
Operating and maintenance instructions
carrying case
Depth stop
Dust protection cap

ATEX: II2GExhIIBT6Gb
2,199.00 €
Infrared radiant heater 2000W
The infrared radiant heater 2000W is an adjustable model for wall mounting with ceramic glass and a safety valve.
The radiant heater can heat up to 10 m².
2,099.00 €
Infrared radiant heater 1500W
The 1500W infrared radiant heater is an adjustable model for wall mounting with ceramic glass and a safety valve.
The radiant heater can heat up to 10 m².
2,099.00 €
Socket set, 8+2-piece 1/4”
The set consists of sockets in the following sizes: 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm and 8mm.
The slotted screwdriver is 55 mm long.
174.59 €
Socket set, 11-piece 1/4”
The set consists of sockets in the following sizes: 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm and 13mm.
The slotted screwdriver is 55 mm long.
215.05 €
Socket set, 13-piece 3/8"
The set consists of sockets in the following sizes: 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 17mm and 19mm.
The 13/16″ spark plug ratchet wrench (200mm) is a straight joint wrench. It can be extended up to 75mm.
332.35 €
Socket set, 21-piece 1/4”* 3/8”
The set consists of sockets of the following sizes: 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm and 8mm.
The ratchet wrench (200mm) is a straight joint wrench (extension 75mm and 150mm).
The 3/8″ socket wrenches are available in 10mm, 11mm, 12mm, 13mm, 14mm, 17mm and 19mm.
A 13/16″ spark plug adapter 3/8″*1/4″ Driver Type Handle 55mm is also included.
468.35 €
Socket set, 9-piece 1/2”
The set consists of socket wrenches in the following sizes: 10mm, 11mm, 12mm, 14mm, 17mm, 19mm, 22mm and 24mm.
The offset handle is 230mm long.
315.01 €
Socket set, 13-piece 1/2”
The set consists of socket wrenches in the following sizes: 8mm, 10mm, 11mm, 12mm, 14mm, 17mm, 19mm, 22mm, 24mm and 27mm. The ratchet wrench is 245mm and the articulated handle is 250mm long.
514.59 €
Socket set, 17-piece 1/2”
The set consists of socket wrenches in the following sizes: 10mm, 11mm, 12mm, 14mm, 17mm, 19mm, 22mm, 24mm, 27mm, 30mm and 32mm.
Additional accessories: ratchet wrench 245mm, sliding T-handle 250mm, speed handle 400mm, driver extension 125mm, 250mm socket case.
855.95 €