Lamps

The 5568-CHGR2 snap-in quick charger for use with the rechargeable, intrinsically safe Nightstick series 5566/5568 angle lights. The INTRANT angle lights snap into the charger's robust retaining clips, which hold the light securely in place. This charger can be mounted on a wall or any solid surface in the vehicle and can withstand a force of up to 9G.

5-bank charger for the 5568 INTRANT series of angle lights. The charger is mounted horizontally and allows the lights to be mounted vertically in five individual chargers. This model includes a hardwired DC power cable and works with 12-36V DC power systems.

The 5-bank charger for the INTRANT XPR-5568 series angled luminaires. Mounted horizontally, it allows the luminaires to be placed vertically in five individual chargers. This model includes four 1.80 m power cords for US, UK, European Union and Australian standards. Each power cord has a C13 monitor/PC female end and a country-specific plug: US - NEMA 5-15 3-prong plug, UK - 3-prong plug type G, EU - European 2-prong round plug and AU - Type I 3-prong plug.

The replacement charger 5580-CHGR2 is made of engineering polymer and is suitable for use with the XPR-5580R, XPR-5580G, and XPR-5581RX intrinsically safe rechargeable dual light lamps. The lamp can be safely inserted and locks the light when mounted on a wall or other solid surface in the vehicle. A charging cable is not included.

This 12-volt direct-cable kit works with all existing Nightstick and Bayco charging stations. It is equipped with a standard hollow plug and provides a permanent connection to the DC fuse box power system in most vehicles. The kit includes a user-replaceable 3-amp fuse and polarity protection to ensure that chargers or lights are not damaged if the cables are installed incorrectly, as well as two self-adhesive mounting clips for fuse holders.

This 12-volt right-angle direct cable set works with all existing Nightstick and Bayco charging stations. It provides a permanent connection to the DC fuse box system in most vehicles. The set includes a user-replaceable 3-amp fuse and polarity protection to ensure that chargers or lights are not damaged if the cables are installed incorrectly, as well as two self-adhesive mounting clips for fuse holders.

The NS-DW1236 wiring kit is recommended for the permanent installation of rechargeable chargers in commercial emergency vehicles. This kit reduces the voltage from 36V to 12V while protecting the product from power surges and unexpected spikes. A replaceable 3-ampere glass fuse provides additional protection against overcharging and cable damage caused by abrasion. This direct wiring kit comes with a standard hollow plug on one end and red and black cables on the other, and includes two padded terminals for a professional installation.

This helmet clip allows Nightstick headlamps to be mounted without damaging the helmet.

The unique design of this multi-angle helmet mount fits into an accessory slot on hard hats and also attaches directly to the brim of most hard hats and fire helmets. Compatible with any size of traditional or oversized or undersized fire or hard hat, this multi-purpose mount features a one-handed locking screw.

Rotating bracket for lamps in the XPP-5418 and NSP-2420 series, specially designed for European MSA firefighting and search and rescue helmets that are already equipped with the optional MSA flashlight bracket. The NS-HMC8B slides into the bracket slot and is held securely in place with an adjustable Allen screw (wrench included). The lamp can be flipped up and down 45 degrees for optimal light placement. A mount for the European MSA flashlights, which is not included, is required.

This 4-foot magnetic USB charging cable for Nightstick 5554/5562 products has a LED charge indicator.

This 2 AAA pen lamp is ultra-compact and super-slim, with a strong light output designed to illuminate very narrow spaces. The switch on the end cap offers a momentary or continuous on function. It is powered by 2 AAA batteries, which are included.

The intrinsically safe Dual-Light LED flashlight offers peak performance in hazardous work environments. Maximize safety and utility benefits by activating both lights simultaneously in Dual-Light mode. Features easy-to-use top-mounted switches, rugged glass-filled nylon polymer body, integrated magnet at base, and reversible pocket clip.

The yellow flashlight is for use in above and below ground hazardous locations where explosive gases and dust may be present. This torch uses a 200-lumen LED that, when coupled with a high-efficiency deep parabolic reflector, produces a usable torch beam with a range of 143 meters. The end switch offers a momentary or continuous on function. We operate the torch with 3 AA batteries, which are not included.

The torch is for use in hazardous areas above and below ground where explosive gases and dusts may be present. The XPP-5420GX uses a 210-lumen LED that, in combination with a highly efficient parabolic reflector, produces a usable torch beam with a range of 187 meters. The switch on the housing offers a momentary or continuous operation function. Power is supplied by 3 AA batteries, which are not included.

The black Dual Light torch offers 120 lumens, a range of 170 meters and an integrated floodlight.

This Dual-Light flashlight uses a 120-lumen LED that, when combined with a highly efficient deep parabolic reflector, produces a usable flashlight beam with a range of 170 meters.
In addition, both the torch and the floodlight can be switched on at the same time for maximum versatility at 240 lumens. The two body switches provide a momentary or maintained on function for the torch and an on/off function for the floodlight. It is powered by 3 AA batteries, which are not included.

This torch can be used both above and below ground in explosion-hazardous areas where explosive gases and dust may be present. This lamp uses a 200-lumen LED that works with a deep parabolic reflector to produce a torch beam of 143 meters. The limit switch offers a momentary or steady light function.
It is powered by 3 AA batteries, which are not included. The mount can be attached to either side of the helmet for hands-free lighting. Use the 140-degree adjustment mount to fine-tune the light to make room for face shields, goggles, or other helmet-mounted equipment.

This torch is suitable for use in above and below ground hazardous locations where explosive gases and dust may be present. This lamp uses a 200-lumen LED that works with a deep parabolic reflector to produce a 143-meter torch beam. The limit switch provides a momentary or steady light function. Power is provided by 3 AA batteries, which are not included. The mount can be attached to either side of the helmet to provide hands-free illumination. Fine tune the light with the 140-degree adjustment bracket to accommodate face shields, goggles or other helmet-mounted equipment.