Accessories

The switch box is for TP9000 and is supplied with a Nexus plug. When the switch box is connected to the radio, a practical “push-to-talk” function is achieved. It has a button on the side and an exceptionally large button area in the middle. This is particularly suitable for environments where workers wear large gloves, as the button function can be easily activated in this way.

The over-ear headset is for the TP9000 ATEX radio.
The headphones protect against loud external noise.
The loudspeaker impedance is 16 ohms with a noise-canceling electret microphone.

This is a mounting kit for connecting BL910 chargers (TP9000EX THOR1 ATEX T4) for multiple charging (2 for 3-slot charger, 3 for 4-slot charger, etc.).

The battery is approved in combination with the BARTEC SP9EX1 smartphone and the BARTEC SC9EX1 smart scanner.
It is important that the battery can only be changed and charged outside potentially explosive atmospheres.

The protective cover is approved in combination with the BARTEC SP9EX1 smartphone.
The black protective cover is made of hard plastic and has a cover for the USB-C interface.
It is important that the protective cover may only be attached and removed outside potentially explosive atmospheres.

Included in the scope of delivery:
- Protective cover
- Adapter button

The belt loop set is suitable for the BARTEC SP9EX1 smartphone, the BARTEC SC9EX1 smart scanner, the Pixavi Phone and the Pixavi Cam.
The closed belt loop is made of robust leather and has a 1/4” quick-release adapter button.

Included in delivery:
- Belt loop
- Adapter button

Additionally required (not included):
- Protective cover for smartphone
(type 17-S1Z0-0021) or
Protective cover for smart scanner
(type 17-S1Z0-0022)

The screen protector is suitable for the BARTEC SP9EX1 smartphone and the BARTEC SC9EX1 smart scanner.
It is important that the protective film is only applied and removed outside potentially explosive atmospheres.

The passive stylus with spiral cable can be ordered individually or in a pack of 3.
It is important that the stylus may only be changed outside of potentially explosive atmospheres.

The wrist strap with quick-release clip is suitable for the Pixavi Phone, the Pixavi Cam, the BARTEC SP9EX1 smartphone and the BARTEC SC9EX1 smart scanner.
It protects the device from falling.

The neck strap with quick-release clip is suitable for the Pixavi Phone, the Pixavi Cam, the BARTEC SP9EX1 smartphone and the BARTEC SC9EX1 smart scanner.
The neck strap protects the device from falling.

The battery tool is suitable for the Pixavi Phone, the Pixavi Cam, the BARTEC SP9EX1 smartphone and the BARTEC SC9EX1 smart scanner.
It is important that the tool is only used outside of
areas where there is a risk of explosion.

The plug-in power supply (EU) is suitable for the BARTEC SP9EX1 smartphone and the BARTEC SC9EX1 smart scanner.
It is important that the plug-in power supply is only used outside of
hazardous areas.

The USB-C cable (type G7-S0Z0-0010) is not included in the scope of delivery and can be purchased separately if required.

The 4-way charging station is suitable for the BARTEC SP9EX1 smartphone and the BARTEC SC9EX1 smart scanner.
The charging station allows you to charge up to four smartphones or smart scanners and batteries at the same time.
The charging station may only be used outside potentially explosive atmospheres.

Included in the scope of delivery:
- 4-way charging station
- Power supply unit for 4-fold charging station

Also required (not included in the scope of delivery):
Country-specific AC power cable
(with IEC-60320-C13 plug)
e.g. AC power cable type G7-S0Z0-0020/0021/0022/0023

The power supply unit for the single charging station is suitable for the BARTEC SP9EX1 smartphone and the BARTEC SC9EX1 smart scanner.
The power supply unit is only intended for use outside of
outside potentially explosive atmospheres.

The power supply unit for the 4-fold charging station is suitable for the BARTEC SP9EX1 smartphone and the BARTEC SC9EX1 smart scanner.
The power supply unit may only be used outside potentially explosive atmospheres.

The housing of the explosion-proof VoIP gateway box is made of an aluminum alloy with an anti-corrosion coating.
The operating temperature range is -40°C to +60°C.
The dimensions are 125x125x88 mm and the weight is approx. 2 kg.

In an industrial complex, loud noise (e.g. from machinery) can make communication from explosion-proof telephones difficult or even impossible.
For this reason, LELAS offers a range of
acoustic booths to overcome this limitation.
This solution also helps to
increase privacy and protect the equipment
from the weather and dust.

In an industrial complex, loud noise (e.g. from machinery) can make communication from explosion-proof telephones difficult or even impossible.
For this reason, LELAS offers a range of
acoustic booths to overcome this limitation.
This solution also helps to
enhance privacy and protect the equipment
from the elements and dust.

The material of the lamp housing is aluminum.
It can be fixed to the wall with 2 screws.
The dimensions are 140x125.7x242 mm and the lamp weighs approx. 2.7 kg.
The lamp can be used at an ambient temperature of -40°C to +60°C.

Additional options:
- Different colors of the flashing light (red, blue, green,
yellow)
- Different colors of the housing (on request)

The housing of the lamp is made of aluminum.
It can be attached to the wall with 2 screws.
The dimensions are 140x125.7x242 mm and the lamp weighs approx. 2.7 kg.
The lamp can be used at an ambient temperature of -40°C to +60°C.

Additional options:
- Different colors of the flashing light (red, blue, green,
yellow)
- Different colors of the housing (on request)