This torch is suitable for use in above and below ground hazardous locations where explosive gases and dust may be present. This lamp uses a 200-lumen LED that works with a deep parabolic reflector to produce a 143-meter torch beam. The limit switch provides a momentary or steady light function. Power is provided by 3 AA batteries, which are not included. The mount can be attached to either side of the helmet to provide hands-free illumination. Fine tune the light with the 140-degree adjustment bracket to accommodate face shields, goggles or other helmet-mounted equipment.

This torch can be used both above and below ground in explosion-hazardous areas where explosive gases and dust may be present. This lamp uses a 200-lumen LED that works with a deep parabolic reflector to produce a torch beam of 143 meters. The limit switch offers a momentary or steady light function.
It is powered by 3 AA batteries, which are not included. The mount can be attached to either side of the helmet for hands-free lighting. Use the 140-degree adjustment mount to fine-tune the light to make room for face shields, goggles, or other helmet-mounted equipment.

The flat scraper is available in aluminum-copper (AC) and copper-beryllium (BC).

Features of the BRONZEplus impact ring wrench:
FlankTraction profile (12-edge)
based on DIN 7444
with striking edge
for particularly heavy assemblies
non-sparking
explosion-proof
corrosion-resistant
wear-resistant
aluminum-bronze (non-ferrous alloy)

The SAMSUNG S Pen for the Tab-Ex® 05 series enables precise input, drawing and note-taking in demanding work environments, ideal for hazardous areas.

The ST T03 X2 Samsung S Pen stylus has been developed for the Tab-Ex 03 and Tab-Ex 04 Pro series.

The 3 AA torch with double light uses a 160 lumen LED that, in combination with a highly efficient deep parabolic reflector, produces a usable torch beam with a range of 170 meters.
In addition, both the torch and the floodlight can be switched on simultaneously, allowing for maximum versatility at 260 lumens. The two switches on the casing allow the torch to be switched on and off temporarily or permanently, and the floodlight to be switched on and off. In addition, the integrated magnets at the base of the handle and on the pocket clip allow for almost unlimited hands-free use. Power is supplied by 3 AA batteries, which are not included.

The angle handle is used for driving in hand-operated sockets for working in confined spaces.
The handle is available in both aluminum-copper (AC) and beryllium-copper (BC).

The Li-ion battery BPIS170.2A with 2800 mAh is compatible with IS170.2 and RG170. Size: 67.86 x 40.0 x 10.37 mm. Provides reliable power for everyday use.

PanzerGlass film for advanced display protection. Suitable for IS930.1, IS930.M1, IS930.2 and IS930.RG devices.

The copper hammer is only available in copper (Cu).

The arm band made of antistatic Cordura offers a secure way to carry smartphones and cell phones on the arm. These can be firmly attached to the matching leather case using a clip and snap fastener.

IS120.2 Li-ion battery 2200 mAh, type BPIS120.2A
size 65 x 40.0 x 13.5 mm (L x W x H)

Hand strap for Pad-Ex 01 D2 and DZ2.

The scraper is available in aluminum-copper (AC) and copper-beryllium (BC).

The spatula with wooden handle is available in aluminum-copper (AC) and copper-beryllium (BC).

The hammer is available in aluminum-copper (AC) and copper-beryllium (BC).

The adjustable wrench is suitable for various sizes of fasteners by adjusting the opening size.
It is available in both aluminum-copper (AC) and beryllium-copper (BC).

By simply turning the handle forwards and backwards, the socket can be turned using the ratchet wrench without removing it from the nut or bolt.
The handle is available in both aluminum-copper (AC) and beryllium-copper (BC).

Replacement mounting forks for helmet mounting of SM1P headsets.